Manuals / Numark Industries / Musical Instruments & Equipment / DJ Equipment

Numark Industries EM360 owner manual Quick Setup Diagram

Models: EM360

1 12
Download 12 pages 45.97 Kb
Page 7
Image 7

EM360

QUICK SETUP DIAGRAM

VERY IMPORTANT: Please read this entire manual before connecting this unit to your system

For optimum performance:

•Always make sure that AC power is OFF while making any connections.

•Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittence that could easily damage your speakers. Make the input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.

•ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients, which may cause severe speaker damage.

•Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier clipping. Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier distortion is THE major cause of speaker failure.

Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on.

IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.

- The Leader in DJ Technology

©2000Industries

- 7 -

http://www.numark.com

Page 6 Page 8
Page 7
Image 7
Numark Industries EM360 owner manual Quick Setup Diagram
Page 6 Page 8

EM360 specifications

Numark Industries has long been a reputable name in the world of DJ equipment and audio technology, and the EM360 mixer is a prime example of their commitment to innovation and quality. Designed for both professional DJs and aspiring enthusiasts, the EM360 encompasses a myriad of features and technologies aimed at enhancing the audio mixing experience.

At the core of the EM360 is its highly intuitive mixer interface, offering a streamlined layout that facilitates effortless navigation. With its four-channel configuration, users can seamlessly blend tracks from multiple sources, including turntables, CDJs, and even digital audio from a laptop or mobile device. Each channel is equipped with a Gain control, EQ sliders, and an easy-to-use fader, enabling precise adjustments and a personalized sound profile based on individual preferences.

One of the standout features of the EM360 is its built-in effects processor, which allows DJs to apply creative audio effects on-the-fly. With a variety of effects, including reverb, echo, and phaser, DJs can elevate their mixes and add an extra layer of excitement to their performances. The comprehensive effects section can be easily adjusted using dedicated knobs, allowing for real-time manipulation of each effect.

The EM360 also integrates advanced connectivity options, ensuring compatibility with a wide range of devices. With multiple RCA inputs and outputs, USB connections, and XLR outputs, users can easily connect their favorite equipment without facing compatibility issues. This makes the EM360 versatile enough for various settings, whether in a club, studio, or at home.

In terms of build quality, Numark Industries utilizes durable materials that are designed to withstand the rigors of constant use. Its robust chassis is complemented by smooth faders and buttons that provide tactile feedback, ensuring reliable performance over time.

Another noteworthy characteristic of the EM360 is its compact design, making it an excellent choice for mobile DJs and those with limited space. Weighing in at a lightweight balance, it can be easily transported without compromising on functionality.

In summary, the Numark Industries EM360 mixer stands out as an exceptional tool for DJs looking to enhance their performance capabilities. With its versatile four-channel setup, intuitive interface, built-in effects, comprehensive connectivity options, durable build quality, and compact design, it's a worthy addition to any DJ's arsenal. Whether you're performing in front of a crowd or practicing your skills at home, the EM360 is engineered to support creativity and elevate the art of mixing.