Numark Industries MPCD3 Before Switching Off The Power, Troubleshooting, Symptom, Possible Cause

Models: CDN15 MPCD3

1 16
Download 16 pages 35.56 Kb
Page 14
Image 14
BEFORE SWITCHING OFF THE POWER:

CDN15/MPCD3

BEFORE SWITCHING OFF THE POWER:

When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power.

DO NOT switch off the power when

Switch off the power after the

the disc holder is open.

disc holder has been closed

 

with the “OPEN/CLOSE” button

TROUBLESHOOTING:

Symptom

Possible Cause
Corrective Action

 

 

 

The power fails to switch on when the

Poor power plug connection at the AC

Insert the power plug firmly into the AC

POWER switch is set to on

outlet or IEC Power cord loose from

outlet and make sure connection is

 

rear of unit

good in unit rear

Disc play does not start

The disc is loaded upside down

Reload the disc with the label side up

 

The disc is too dirty

Clean the disc

 

 

 

No sound

Sound skips

Hum

Improper output cable connections

Connect the output cables correctly

Improper amplifier operation

Check amplifier setup

The CD player is subject to vibrations

Change the installation location

or physical shock

 

The disc is too dirty

Clean the disc

Loose cable connections

Firmly connect all audio plugs

 

 

©2002 Numark Industries

- The Leader in DJ Technology

http://www.numark.com

- 14 -

Page 14
Image 14
Numark Industries MPCD3, CDN15 Before Switching Off The Power, Troubleshooting, The Leader in DJ Technology, Symptom