CDN15/MPCD3
DISPLAY FEATURES
1.CUE: Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
2.PAUSE (II): Active when the unit is paused.
3.PLAY (>): Active while the unit is actually playing a CD.
4.TRACK: Shows the track that the unit is playing.
5.TOTAL: indicates when total CD remaining tracks are displayed.
6.MINUTES: Shows the minutes elapsed or remaining depending on mode setting.
7.SECONDS: Shows the seconds elapsed or remaining depending on mode setting.
8.FRAMES: The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.
9.AUTOSTART: will light when the unit is set to relay from CD unit to CD unit.
10.CONTINUOUS PLAY: Shows when the unit is set to play back the entire CD without stopping between tracks.
11.SINGLE PLAY: Shows when the unit is set to play just one track at a time.
12.CD IN: indicates a CD is in the unit.
13.TIME BAR: Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the “time” button.
TIME MODE:
14.REMAIN indicates when track remain time is displayed.
15.TOTAL indicates when total CD remain time is displayed.
note: both indications will not be lit when the unit is showing “elapsed” time
16.SEARCH: indicates when the unit is searching through the music.
17.PITCH DISPLAY: indicating current pitch.
18.PROGRAM: Indicates when a track sequence has been programmed in the memory.
19.MP3 (MPCD3 only): Indicates when an MP3 CD is in the drawer.
©2002 Numark Industries | - The Leader in DJ Technology | http://www.numark.com |
- 9 - |