MPCD33
Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music, rotate the jog wheel counter clockwise (to the left). When the CD is behind, rotate the jog wheel clockwise (to the right). The pitch changes temporarily while the jog wheel is rotated. The faster you rotate the wheel the more pitch is changed. Releasing the wheel results in a return to the original pitch.
13.Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. Tapping the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will deactivate the pitch control.
14.Pitch Range LEDs: indicate current pitch range. When both LEDs are off, the pitch slider is not active
15.Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the slider in the (- ) direction the speed of the music permanently slows down. To match the speeds of two CDs you can adjust the pitch. When the tempo of the music of the CD you wish to match is slow compared to the tempo of the other music, move the slider to the (+) side and match the speed. When faster, move the pitch slider to the
16.Pitch Bend Buttons: Allows the user to temporarily change the speed of the music to align beats. When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music press the
17.BPM: Toggles the numeric display between pitch and BPM.
18.TAP: Tapping this button with the beat of the music indicates the current Beats Per Minute (BPM) in the display. The unit will average your taps to determine the BPM so multiple taps is recommended.
19.Relay – Pressing this button will cause the sides of the unit to alternate play as one stops and the other starts. If the players are set to single play mode then relay will alternate after each track. If the players are set to continuous it will relay after the entire CD is played.
20.CD Drawer: Place your CDs you wish to play in here. This unit is designed to play commercially available CD and properly burned and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners and CDs some discs home made CDs may not play properly.
21.Power Switch: Turn on and turn off the machine with this button. The unit should always be shut down with this button first before any external power is removed.
DISPLAY FEATURES
1.CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
2.PAUSE (II)- Active when the unit is paused.
3.PLAY (>)- Active while the unit is actually playing a CD.
4.TRACK - Shows the track that the unit is playing.
5.TOTAL – indicates when total CD remaining tracks are displayed.
6.MINUTES - Shows the minutes elapsed or remaining depending on mode setting.
7.SECONDS - Shows the seconds elapsed or remaining depending on mode setting.
8.FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting.
9.AUTOSTART – will light when the unit is set to relay from CD unit to CD unit.
10.CONTINUOUS PLAY – Shows when the unit is set to play back the entire CD without stopping between tracks.
11.SINGLE PLAY- Shows when the unit is set to play just one track at a time.
12.CD IN – indicates a standard CD is in the unit.
13.TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the “time” button.
TIME MODE -
14.(Remain) indicates when track remain time is displayed.
15.(Total) indicates when total CD remain time is displayed
note: if both indications are not lit, the unit will be showing “elapsed” time
16.SEARCH – indicates when the unit is searching through the music
17.Numeric display - indicating either current pitch or BPM
18.PITCH - is lit when pitch is being displayed
19.BPM – is lit when BPM is being displayed
20.MP3 – indicates when a CDR with MP3 files is inserted in the player
©2002 Numark Industries | - The Leader in DJ Technology | http://www.numark.com |
- 7 - |
