PRODUCT FEATURES
1.Platter: Place your record on the platter.
2.Control Panel: Please see the alternate detailed section on the control panel features.
3.On Board Speaker: Use this speaker to listen to the audio.
4.Tone Arm Clip: Use this clip to secure your tonearm when storing and transporting the unit.
5.Tonearm: This unit comes with a ready to use pre- balanced tonearm and cartridge. The cartridge is user replaceable with parts from your distributor located in the warranty guide. The platter starts spinning once the tonearm is lifted over the record.
6.45 Adapter: Use this adapter with 45 rpm records.
7.Dust Cover: This cover protects the turntable from dust and abuse while not in use or while in transport.
8.Dust Cover Latch: This latch holds the dustcover securely in place, and can easily be opened by sliding it to the left.
9.Carry Handle: Use this handle easily remove the unit from record crates and bags, as well as carrying it in transport.
10.Battery Cover: This holds the batteries securely in place during use and transport. It easily slides open and closed as indicated on the cover itself. NOTE: This unit uses 6 “D” cell batteries (not included). They should be installed in the proper direction indicated
OUTPUT PANEL |
|
|
|
|
| ||||||
1. | Power Switch: Use this switch to turn the power on and |
|
| system, powered speaker, or a home stereo. The level | |||||||
| off. |
|
| of the master stereo output signal is controlled by the | |||||||
2. | AC In: This turntable is designed to work with either |
|
| audio level control. | |||||||
| batteries or the power supply cord that comes with it. |
| 4. | 1/8” Headphone Jack: Use this jack with the 1/8” mini | |||||||
| While the power is switched off, plug the power supply |
|
| headphone plug. NOTE: Be sure the volume control is | |||||||
| into the turntable first, then plug it into the wall power |
|
| set to the OFF position before plugging in any | |||||||
| outlet, then switch on. NOTE: This unit can also be |
|
| headphones to avoid permanent hearing damage. | |||||||
| powered by 6 “D” Cell batteries (Not Included). |
| 5. | 1/4” Headphone Jack: Use this jack with the 1/4” | |||||||
3. | Master Output (RCA): This “line level” output is for |
|
| headphone plug. NOTE: Be sure the volume control is | |||||||
| connecting to the input of an external audio device |
|
| set to the OFF position before plugging in any | |||||||
| such as a DJ mixer, tape recorder, CD Burner, PA |
|
| headphones to avoid permanent hearing damage. | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| RPM | PITCH |
| TONE | AUDIO | ||||
|
|
| POWER |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
33 | 45 | 78 |
+10% LOW | HIGH OFF |
|
|
CONTROL PANEL FEATURES
1.Audio Level Control: This rotary control adjusts the volume level of the onboard speaker, headphone and line out outputs. NOTE: Make sure the Audio Level Control is set to OFF when connecting any alternate audio output devices.
2.Tone Control: This feature allows you to adjust the low and high frequency audio levels.
3.Pitch Control: This knob adjusts the pitch of the music +/- 10%. In the center position the pitch is at 0%.
NOTE: In order for the pitch to be adjusted, the tempo also changes according to what the pitch setting.
4.RPM Selection Switch: This switch selects the RPM of the turntable platter
5.Power LED: This LED indicates that the power switch on. Make sure the power is off when storing or transporting the unit, to avoid wasting battery power.