TT1910
OPERATING INSTRUCTIONS
. Push the power button to turn on the power, the speed indicator and the
. Place a record on the turntable mat, when playing a 45rpm record with a large center hole, place the
. Set the rotation speed (33/45) to match the record.
. Remove the stylus protector, release the arm clamp.
. Set the cueing lever to the up position.
. Press the Start/Stop button, the turntable platter will start to rotate.
. Move the tonearm over the desired groove.
. Set the cueing lever to the down position, the tonearm will descend slowly onto the record and play begins.
. To suspend play, lift tone arm with cueing lever.
0.When play is finished,raise the cueing lever, move the tonearm to the arm rest, secure the tonearm with the arm clamp .
1.Press the Start/Stop button to stop the platter rotating, push the power button to turn off the power.
TARGET LIGHT
his unit is provided with a target light for illuminating the stylus tip during play. Push the target light button, the target light will be raised into position for illuminating the stylus tip. When not in use, keep the target light lowered through depression.
PITCH ADJUSTMENT
he pitch control is variable in a range of +/- 10%. During play, observe the strobe dots, if the strobe dots appear to the right, the pitch is slower than the rated speed, if flow to the left, the pitch is faster than the rated speed, if the strobe dots appear stationary, which means the platter is in normal turntable speed. Move the pitch control slider up or down to adjust the speed.
PLACEMENT
•Do not place the unit in a location where it will be exposed to direct sun light or near a heating appliance.
•Do not place the unit in a location where there is high humidity or a lot of dust.
•Cartridge may pick up slight sound pressure or vibrations of the speakers coming along the floor or through the air resulting in howling. Find a location which is very stable and free vibration.
•The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally.
MAINTENANCE
•Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
•When the sound becomes distorted or noisy, check the stylus. If worn out, replace it with a new one.
•From time to time, the dust cover and turntable cabinet should be wiped with a soft, dry cloth. Any volatile materials as alcohol,thinner, benzine, etc.,may remove the paint or damage the luster, should not be used.
SPECIFICATIONS
Turntable section |
|
Type | |
Driving method | Direct drive |
Motor | 8pole,2phase, |
| brushless DC motor |
Turntable platter | Aluminum diecast 330mm dia. |
Turntable speed | |
Starting torque | more than |
Braking System | Electronic Brake |
Wow and flutter | Less than 0.20% |
S/N ratio | 55dB |
Tonearm section |
|
Type | Universal |
Effective length | 220mm |
General |
|
Power supply | |
| 240V,50/60Hz |
Power consumption | 20 Watts |
Dimension(WxDxH) | 450 x 350 x 148 mm |
| 17 3/4” x 13 3/4” x 5 7/8” |
Weight | 7.5 Kgs 16 lbs |
Specifications and design may be changed without notice for improvement.
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries | 7 | http://www.numark.com |