Manuals / Numark Industries / Home Audio / Turntable

Numark Industries TTUSB quick start Setting the Anti-SkateAdjustment

Models: TTUSB

1 16
Download 16 pages 6.31 Kb
Page 6
Image 6

Setting the Anti-Skate Adjustment

In most cases, the Anti-Skate should be set to its minimum setting. Anti-Skate compensates for inward tracking forces that occur with certain cartridges when the stylus nears the center of the record. If the turntable is experiencing excessive skipping during back-cueing and scratching while nearing the center spindle, try increasing the Anti-Skate in the increments indicated on the dial. Start by adding an increment of 1, test its performance, than increase it more, and so on.

IMPORTANT

Make sure that the felt slipmat is always placed on top of the platter while using the turntable. Failure to use the slipmat may cause damage to your media as well as damage to the turntable.

Remove the plastic cartridge cover (needle cover) before operating the turntable.

BEFORE RETURNING THE PRODUCT, please contact Numark Industries or your retailer for technical support. Contact information can be found in the Safety Instruction Booklet included with this product.

6

Page 5 Page 7
Page 6
Image 6
Numark Industries TTUSB quick start Setting the Anti-SkateAdjustment
Page 5 Page 7

FAQ

What is the recommended setting for Anti-Skate?

In most cases, the Anti-Skate should be set to its minimum setting to compensate for inward tracking forces.

Should I use the slipmat when using the turntable?

Yes, it is important to always place the felt slipmat on top of the platter while using the turntable to prevent damage to your media and the turntable.

How can I get technical support for my Numark Industries TTUSB turntable?

Before returning the product, please contact Numark Industries or your retailer for technical support. Contact information can be found in the Safety Instruction Booklet included with this product.