INSTALL THE DUCTWORK

(DUCTED HOODS ONLY)

NOTE: To reduce the risk of fire, use only metal ductwork.

1.Decide where the ductwork will run between the hood and the outside.

2.A straight, short duct run will allow the hood to perform most efficiently.

3.Long duct runs, elbows, and transitions will reduce the performance of the hood. Use as few of them as possible. Larger ducting may be required for best performance with longer duct runs.

4.Install a roof or wall cap. Connect round metal ductwork to cap and work back to- wards hood location. Use duct tape to seal the joints between ductwork sections.

WIRING

Note: This range hood must be properly grounded. The unit should be installed by a qualified electrician in accordance with all applicable national and local electrical codes.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

ROOF CAP

 

 

ROUND

 

DUCT

DECORATIVE

WALL

FLUE

CAP

HOOD

 

24” TO 30” ABOVE

6”

 

COOKING SURFACE

ADAPTER

 

fig.2

 

33-7/16"

 

(85cm)

 

max

 

fig.3

WARNING - Improper grounding can result in a risk of electric shock.

Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.

Set the electrical power supply within the space covered by the decorative flues.

Position the power socket at a maximum distance of 33-7/16” (850 mm) from where the lead exits from the hood (see illustration alongside). Make sure this does not interfere with the bracket fastening area or with the decorative pipe (where the flue touches the wall).

Fit the plug into the power socket.

5

Page 4 Page 6
Page 5
Image 5
NuTone NP50000, NP503004 manual Install the Ductwork, Wiring, Ducted Hoods only
Page 4 Page 6

NP50000, NP503004 specifications

The NuTone NP503004 and NP50000 models represent a significant advancement in the realm of home ventilation and air quality management. Designed for both residential and commercial use, these models are known for their durability, efficiency, and state-of-the-art features that enhance indoor air quality.

One of the standout features of the NuTone NP503004 is its powerful fan system, which is engineered to deliver high airflow while maintaining low noise levels. This model incorporates an innovative motor technology that allows for efficient operation, saving on energy costs while effectively removing stale air, moisture, and odors from any space. This efficiency is further enhanced by the inclusion of a removable, washable grease filter that ensures a continuous flow of clean air.

In addition, the NP50000 model employs advanced humidity sensing technology. This feature automatically detects increased moisture levels and activates the fan to help prevent mold and mildew accumulation, a prevalent issue in many homes and bathrooms. The ability to control the fan's operation based on real-time conditions enhances both convenience and effectiveness.

Another key characteristic of these NuTone models is their sleek, modern design, which seamlessly integrates into various home aesthetics. The low-profile housing ensures that they do not protrude awkwardly, maintaining an unobtrusive presence while providing superior functionality. Installation is also straightforward, making them suitable for various settings, from newly constructed homes to renovations.

Both models include multiple speed settings, allowing users to customize airflow based on their specific needs. Whether it’s a quick ventilation boost after a shower or steady air circulation in a larger space, these fans offer flexibility that caters to diverse requirements. The NP503004 and NP50000 also feature convenient LED lighting options, providing adequate illumination for various tasks while ensuring energy efficiency.

In summary, the NuTone NP503004 and NP50000 models stand out due to their powerful performance, energy-efficient technologies, advanced humidity sensing, and elegant design. They not only enhance indoor air quality but also add to the aesthetic appeal of any room, making them an excellent choice for homeowners and commercial spaces alike, looking to invest in top-tier ventilation solutions.
Top Page Image Contents