NuTone NP60000 Install Light Bulbs and Warming Lamps, Install Filters, Baffle Filters

13. INSTALL LIGHT BULBS AND WARMING LAMPS

Install (2) heat lamp bulbs. Use BR40 size, 250 W max., infrared bulbs only (sold separately). Install (3) halogen light bulbs. Use PAR20 size, 50 W (sold separately).

14. INSTALL FILTERS

CAUTION

Remove protective plastic film covering filters before installing them.

It is recommended to install side filters first and finish with center one(s).

1.Insert upper end of filter into the hood (finger sized cup side).

2.Raise lower end toward the inside of hood.

3.Position lower end of filter into channel and pull.

4.Using finger sized cup, pull on the upper end of filter and slide it under the front inner retaining piece.

1

2

4

3

HD0065

HD0024

Replacement filters are available from your dealer. See label inside hood for size and part number.

Baffle Filters

Baffle filters are available as an option. To order them, refer to the table below to find the appropriate filter kit number to your hood. To install them, refer to instruction sheet included with baffle filter kit.

KIT #	HOOD WIDTH
RBF6030	30”
RBF6036	36”
RBF6042	42”
RBF6048	48”
RBF6054	54”
RBF6060	60”
RBF6066	66”
RBF6072	72”

HD0011

BAFFLE FILTER (TYPICAL)

- 10 -