|
| MODELS QTRN050F • QTRN080 • QTRN110 |
|
|
|
|
|
|
INSTALL GRILLE |
| Page |
|
| |
6. Finish ceiling. |
|
|
Install ceiling material. Cut out around housing.
7. Attach grille to housing.
Squeeze grille springs and insert them into slots on each side of hous- ing.
8.Push grille against ceil-
ing.
SERVICE PARTS
Key No. | Part No. | Description |
|
|
|
1 | 97016466 | Housing |
2 | 97016449 | Duct |
3 | 98010102 | Wiring Plate |
4 | 99170245 | Screw, |
5 | 97016932 | Wire Panel/Harness Assembly |
6 | 99020284 | Blower Wheel |
7 | 99080560 | Motor (QTRN050F) |
| 99080568 | Motor (QTRN080) |
| 99080582 | Motor (QTRN110) |
8 | 99100491 | Isolator (4 req’d) |
9 | 97016467 | Motor Plate |
10 | 99250959 | Washer #8 (4 req’d) |
11 | 99260558 | Nut, Hex Lock |
* | 97016587 | Blower Assembly (QTRN050F) |
|
| (includes key nos. 6 thru 11) |
* | 97016621 | Blower Assembly (QTRN080) |
|
| (includes key nos. 6 thru 11) |
* | 97016739 | Blower Assembly (QTRN110) |
|
| (includes key nos. 6 thru 11) |
12 | 97017623 | Grille Assembly |
|
| (includes key no. 13) |
| 97017641 | Grille Assembly - Microban |
|
| (includes key no. 13) |
13 | 99140199 | Grille Spring (2 req’d) |
14 | 99111293 | Spacer (2 supplied) |
15 | 99420665 | Thumbscrew, |
Replacement parts can be ordered on our web- site. Please visit us at www.nutone.com
SERVICE NOTE
To remove Blower Assembly:
Unplug motor (7).
Remove thumbscrew (15) from motor plate (9) flange.
Find the single tab on the motor plate (located next to the receptacle).
Push up near motor plate tab while pushing out on side of housing. Or insert a straight- blade screwdriver into slot in housing (next to tab) and twist screwdriver.
TAB
Order service parts by “Part No.” - not by “Key No.” | 99044094A |