INSTALL GRILLE
MODELS QTREN080FLT • QTREN110FLT
Page 4
SERVICE PARTS
5. Finish ceiling.
Install ceiling material. Cut out around housing.
6. Attach grille to housing.
Squeeze grille springs and insert them into slots on each side of housing.
7.Push grille
against ceiling.
8.Remove light
lens.
19
TAB
19
Replacementpartscan
beorderedonour
website.Pleasevisitus
atwww.nutone.com
SERVICENOTETo removeBlower Assembly:Unplug motor(7).Remove screw(4) from motorplate(9) flange.Findthe singleTABonthe motorplate(located nexttothe receptacle).Pushup nearmotorplatetab whilepushingouton sideofhousing.Or insertastraight- bladescrewdriver intoslotinhousing (nexttotab)and twistscrewdriver.
Carefully insert a small flat- blade screwdriver between grille and lens. Pry lens out.
9.Install light bulbs.
Fluorescent bulb supplied.
Purchase a 4W incandescent night light bulb.
Insert bulbs into their sockets. Replace lens.
Key No. | Part No. | Description |
1 | 97016466 | Housing |
2 | 97016449 | Duct |
3 | 98010102 | Wiring Plate |
4 | 99170245 | Screw, |
5 | 97016933 | Wire Panel/Harness Assembly |
6 | 99020284 | Blower Wheel |
7 | 99080562 | Motor (QTREN080FLT) |
| 99080580 | Motor (QTREN110FLT) |
8 | 99100491 | Isolator (4 req’d) |
9 | 97016901 | Motor Plate |
10 | 99250959 | Washer #8 (4 req’d) |
11 | 99260558 | Nut, Hex Lock |
* | 97016905 | Blower Assembly (QTREN080FLT) |
|
| (includes key nos. 6 thru 11) |
* | 97016906 | Blower Assembly (QTREN110FLT) |
|
| (includes key nos. 6 thru 11) |
12 | 97016885 | Grille Assembly (includes key nos. 13 & 14) |
| 97016916 | Grille Assembly - Microban |
|
| (includes key nos. 13 & 14) |
13 | 99140199 | Grille Spring (2 req’d) |
14 | 99111310 | Lens |
15 | 97016888 | Bulb, 42W Fluorescent |
16 | 97016864 | Ballast Assembly |
17 | 99260423 | Nut, Hex |
18 | 99111293 | Spacer (2 supplied) |
19 | QTNHB1 | Hanger Bar Kit |
Order service parts by “Part No.” - not by “Key No.” | 99043800A |
