1.1 Open or Create Grand Concerto Configurator File | 2.1 IR Libraries |
When you click on this button, the program goes to a Config. File. There you can either open one of the existing configurations or specify the name of a new file. Configurations are saved with a .cfg extension.
1.1 Retrieve Configuration from Grand Concerto
To retrieve a configuration from an existing Grand Concerto installation, launch the Configurator software. Make sure your computer is connected to the RS232 port on the back panel of the Grand Concerto amplifier. The Startup screen has two buttons. The first is used to open an existing configuration or to create a new one. The second asks to “Retrieve Existing Configuration From Grand Concerto.” When you click on the “Retrieve” button, a progress window will appear.
If you have this configuration already stored on your computer's hard drive, you will see a dialog box asking if you wish to overwrite the existing file. If this file is not stored in your computer, this box will not appear.
The IR Library is a list of available components and their IR function codes. The Configurator software stores captured IR codes in a single directory. Once captured or downloaded, the Configurator software will permanently store it as an .irc file.
2.1 IR Libraries
1.1Open or Create Grand Concerto Configurator File
2.2 Adding a New Component to the IR Library
New component IR files are easily added by clicking on the Add New button. This brings up a new window titled Add New Component. In this window you must first enter the manufacturer name and model. The Type
Clicking on OK will automatically add the selected component and associated functions to the IR Library.
12