NuVo Bridge Tab (Fig. 13)
The sources defined in the previous “Media Sources” tab are now selectable with the
NuVo Bridge. At the top of the tab is a “Serial Connection” drop-down that defaults to
“Automatic”. This drop-down is used to select which of the PC's COM ports is to be
used for communication with the Music Port Hardware. If necessary, the drop-down
menu provides a means for manually selecting a COM Port or you can click on the
Discover button and allow the MCS to search for a connected Music Port.
“Audio Connections” shows six drop-down boxes. These correspond with the six source
inputs on either the Grand Concerto or Essentia E6G systems. Each input has a drop-
down menu that contains the outputs established in the previous “Media Sources” tab.
This tab is used to inform the MCS how the audio cables are connected between the PC
and the NuVo System. Next to each NuVo input, select which PC output it is connected
to. Only select a source for the inputs Music Port will occupy within the NuVo System.
Leave the others with the default value of “Please configure your NuVo inputs”. Once
these selections are made, Music Port is ready for NuVoNet communication. Click the
Save button at the bottom of the tab.
Registration (Fig. 14)
The Registration tab indicates that the installed MCS is valid. This is established at the
initial installation of the configuration tool. The license is intended for a single host
PC that acts as the music source for the NuVo audio system. Within the Registration tab
you can transfer the license to a different computer if necessary.
14