![](/images/new-backgrounds/1005114/51149x1.webp)
Introduction
Congratulations on your purchase of the NuVo T2 dual Tuner. With the T2 Dual Tuner, broadcast music enters the
Combined with the NuVo Concerto Whole Home Audio Distribution System, the T2 gives you the ultimate radio experience with Radio Data Service. RDS displays artist and song information on the Concerto Display Pads, which means no more waiting to hear a song title, only to be disappointed when the station cuts to a commercial. Interference Adaptive Signal Processing (IASP) circuitry combined with NuVo’s patent pending Remote Active Antenna provide remarkable radio reception, even when radio stations are typically difficult to receive. The T2 XM satellite tuner provides the full range of stations direct into your home. Listening selections are streamed in real time to all the Display Pads throughout the NuVo Concerto System. The included XM antenna makes satellite reception for the home easy and reliable.
The T2 is packed with many powerful features, and is designed to integrate seamlessly with any distributed audio system. This manual is a guide to making the installation complete, and for making the most of your T2 Tuner. When properly installed, the T2 will provide years of listening enjoyment.
Table of Contents:
Basic Features
Front Panel | page 6 |
Back Panel | page 7 |
RC3 Remote Control | page 8 |
I. Installing the
Stereo Audio Conncetions | page 9 |
Direct IR Control | page 9 |
IR | page 10 |
AM/FM and XM Antenna Input | page 11 |
Proper Location of the XM Antenna | page 12 |
Subscribing to the XM Service | page 12 |
II. Front Panel Menu Controls AM/FM
Exit Menu | page 13 |
Force Mono | page 13 |
Brightness | page 13 |
Advanced Settings
Operating Mode | page 14 |
Regional Setup | page 14 |
page 14 | |
Seek Threshold | page 14 |
Audio Settings | page 15 |
page 15 | |
AUX Input | page 16 |
Noise Blanking | page 16 |
Rs232 Communication | page 16 |
III. Front Panel Menu Control XM
Signal Status | page 17 |
Info | page 17 |
Advanced Settings | page 17 |
Diagnostics | page 17 |
XM Display Button | page 17 |
IV.
Tuning a Desired Station
Step Tune Mode | page 18 |
Seek Tune Mode | page 18 |
Scan Tune Mode | page 18 |
Direct Numeric Tuning | page 18 |
Radio Data Service | page 18 |
Signal Strength/Stereo Indicator | page 19 |
Using the Memory Feature | page 19 |
Source Switching | page 19 |
V. Using the T2 with the Concerto NuVoNet
Setting Up the Tuner for NuVoNet | page 20 |
Making Sure Your Concerto Is Ready | page 20 |
Making the Connection | page 21 |
Operating the T2 with the Concerto Display Pad | |
Tuning by Categories | page 21 |
Radio Data Service | page 21 |
Direct Numeric Entry Tuning | page 21 |
Source Switching | page 21 |
V. T2 Configuration Software |
|
1.0 Start | page 22 |
2.0 Config | page 22 |
3.0 Presets | page 23 |
Advanced Settings |
|
4.0 Advanced Config | page 24 |
5.0 Advanced Presets | page 26 |
6.0 Categories | page 26 |
7.0 Update System | page 27 |
Troubleshooting | page 28 |
page 30 |
Page 4