Nvision.com, Inc. | Migrating from a FreeBSD Server to a FreeBSD v2 Server |
Moving Your Custom Digital Certificate
The default digital certificate is already on your new VPSv2 server. This procedure applies only to custom certificate.
1.Using FTP or another method, copy the certificate and Private Key files to the new server. Both the certificate and the key are stored in the ~/etc/ directory of the FreeBSD Server server. The certificate should be in a file named ssl.cert, and the key should be in the ssl.pk file. If you use FTP, be sure to copy the files to the new server as ASCII files. You will need to copy them to the /usr/local/apache/conf/ directory on the FreeBSD v2 Server.
2.It is a good idea to check your Private Key to make sure it has been decrypted. Use more or your favorite text editor to view the file. If your key has been decrypted, you should not see the following lines before the encoded elements of the key.
3.If your Private Key does have those lines near the beginning, run the following command to remove the encryption.
% openssl rsa
4.Edit your httpd.conf file (located in the /usr/local/apache/conf/ directory) to look for your certificate files. The following directives need to be added to the main section of your httpd.conf file.
SSLCertificateFile /usr/local/apache/conf/ssl.cert SSLCertificateKeyFile /usr/local/apache/conf/ssl.pk
5.After you have added the certificate directives to your httpd.conf file, you need to run restart_apache to make Apache start using the new certificate.
6.Ensure that the new certificate is working by connecting to the domain your certificate is set up to use via HTTPS. For example, if your domain name were www.my- domain.name, you would type the following into your browser's location bar.
7.If the page loads without any errors, find the lock icon on your browser and click on it (depending on your browser, you may need to
Moving Your Custom Digital Certificate | 7 |
