7.Using a Phillips screwdriver, remove the three screws on the gear side end cap (Fig. 7).
8.Using a small flathead screwdriver, depress the locking tab on the gear side end cap (Fig. 8). Pry off the end cap as in step 4.
9.Remove the PCR cleaning roller housing and clean the roller with compressed air and vacuum
(Fig. 9).
Fig. 7
Fig. 8
Fig. 9
10.Spread tabs apart on both sides of the
cartridge while lifting on the OPC drum axle to separate the toner hopper from the waste
hopper (Fig. 10).
Fig. 10
Samsung | 3 |
