15.Slide the developer roller to the left (1), then right and out of the hopper section (2).
Clean the developer roller with compressed air and vacuum. Clean with a cloth and Isopropyl Alcohol if necessary (Fig 15).
16. Remove the two screws that hold the doctor blade with a Phillips screwdriver (Fig. 16). Clean the doctor blade with compressed air and vacuum. Clean with a cloth and Isopropyl Alcohol if necessary.
17. Gently remove the fill plug with a small flat screwdriver and blow out and vacuum the inside of the toner hopper (Fig. 17).
Waste Hopper Disassembly
18.Use a small flathead screwdriver to pry off the E clip from the OPC drum axle (Fig. 18).
Samsung
1
2
Fig. 15
Fig. 16
Fig. 17
Fig. 18
5