OEM Systems dimensions RB-12 In-FloorSubwoofer, C-8SW& SE-80SWD In-WallSubwoofers

RB-12 In-Floor Subwoofer

The Registered Bass 12" In-Floor Subwoofer was designed to mount in standard construction frame floors. With proper preparation it may also be mounted in ceilings. The revolutionary and space saving design installs from above the floor (or below the ceiling). In other words, installation easily takes place from within the living space, not under the floor.

A standard sized 6" x 14" HVAC register vent is used to trim/dress the opening. No register is included with the unit. The customer chooses a standard 6" x 14" sized register vent (diffuser) to match the other registers in the house used for the HVAC system.

Available in Single & Dual Voice Coil versions - RB-12SW & RB-12SWD

Specifications:

12" poly woofer with 2" voice coil, butyl surround, protected by stainless steel screen, mounted to enclosure with stainless steel machine screws into stainless T-nuts Power Handling: 100 Watts nom. 150 Watts max.

Frequency Response: 25 - 100 Hz

Sensitivity: 90 dB @ 1 W/m

Impedance: 8 Ohms nominal

Net Weight: 18 lbs.

Cut-out opening size: 14 1/4" x 6 1/8" x 16 1/2" Deep

Top mounting flange inside dimensions: 14 3/16" x 6" x 1 5/16" Deep (Diffuser Opening)

Top mounting flange outside dimensions: 15 1/4" x 7 1/16"

C-8SW & SE-80SWD In-Wall Subwoofers

8" Dual Voice Coil Carbon Fiber Subwoofers with on board cross-overs & switching for high pass output Frequency Response: 30 Hz - 120 Hz

Power Handling: 50 Watts nom. 100 Watts max.

Impedance: 8 Ohms

	SE-80SWD	OEM Systems Company, Inc.
	Dimensions:
	Cut-out: 8 3/4" x 8 3/4" x 4" Deep	740 Freeport Blvd., #106
		Sparks, Nevada 89431-6168
C-8SW	Overall: 10" x 10"
		775 355-0405 Fax 775 355-0646
Dimensions:
		www.oemsystems.com
Cut-out: 9" W x 13" H x 3 13/16" Deep
		info@oemsystems.com

Overall: 10 1/2" W x 14 1/2" H