Oki 1.2 - page 36

28 Setup

When the gatekeeper is in use, the VoIP-TA operates in the following

manner.

Number VoIP-TA operation

dialed

789 7selects a line, gatekeeper is referenced for the IP address with all numbers

dialed and 789connects the call.

901 9selects a line, gatekeeper is referenced for the IP address with the numbers

dialed, excluding the first digit and 01connects the call.

9901 9selects a line, gatekeeper is referenced for the IP address with the numbers

dialed, excluding the first digit and 901connects the call.

#567 #selects a line, gatekeeper is referenced for the IP address with the numbers

dialed, excluding the first digit and 567connects the call.

#789 # selects a line, gatekeeper is referenced for the IP address with the numbers

dialed, excluding the first digit and 789connects the call.

( This is the same as dialing 789.)

Note

In the example above, when #789is dialed, it is the same as dialing

789, which may lead to misdialing in some cases.

In order to totally separate the PSTN and VoIP lines, set the outgoing

line data in the following manner.

•Set #to Use VoIP line with Neglect first digitselected.

•Set 0to Use PSTN line with Neglect first digitselected.

•Set 1to Use PSTN line without Neglect first digitselected.

��Set all others to Unavailable to dial.

Contents

Main Page Page Contents Important Safety Instructions v Introduction vii I Outline 1 II Installation 5 III Placing Calls 8 IV Setup 17 Important Equipment Information 50 Warranty and Service 51 Oki Service Offices 52 Important Safety Instructions Page Introduction Welcome to the world of Oki Internet telephony I Outline The VoIP-TA Features Front Panel LEDs Back Panel Connectors Table 1 Page Page Cautions During installation During use III Placing Calls Via an IP Network General Operation Services Third party incoming call during another call Page Page Absent service Details of Services Using both a PSTN line and the IP network Page Page Page IV Setup Maintenance Console Software Requirements Installing the Maintenance Console Software Maintenance Console Software Compatibility Functions of the Maintenance Console Software Data Setup Procedure Activating and Deactivating the Softwares Functions Page Changing Modes and Setup Conditions Changing to the Setup mode Changing setup conditions Saving all setup conditions in a file Page Setup (VoIP-TA setting)Window Basic settings for the PSTN line Page Example VoIP-TA will operate in the following way when the internal address table is used. Page Page Page Page Page Page Gatekeeper settings Detailed gatekeeper settings Address table Page Details Voice settings Voice codec setting and bandwidth used G.729A G.723.1 G.711 Page Page V Maintenance Functions of the Maintenance Console Software Verifying the Software Version Information Checking the Operation Status of the VoIP-TA Explanation of the displayed information Click the Close button. Updating Unit Programs Changing the password VI Troubleshooting VII Specifications Protocol and service port number used with the VoIP-TA. Note Important Equipment Information Warranty and Service Warranty Period Following the warranty period Oki Service Offices Head Office London Office Sydney Office Oki Network Technologies