2.2Power Supply Unit
The power supply unit supplies +5 V and +24 V to the main control board according to 230 VAC /120 VAC.
Output voltage | Application |
|
|
+5 V | Used to generate a logic circuit and a high voltage. |
|
|
+24 V | Used to drive the motor and electromagnetic clutch. |
|
|
The power supply unit also contains a heater drive circuit.
2.3
(1)
The
Output |
| Voltage | Application |
|
|
| |
CH | Voltage to be applied to a charge roller. | ||
|
|
| |
DB | Voltage to be applied to a developing roller. | ||
|
|
| |
SB |
| Voltage to be applied to a sponge roller. | |
|
|
|
|
CB | +400 | V | Voltage to be applied to a cleaning roller. |
|
|
|
|
TR | +500 | V ~ +3.5 | Voltage to be applied to a transfer roller. |
|
|
|
|
Caution: The TR voltage varies with medium and transfer roller impedance.
2 - 5