Oki 4W PLUS, 4M specifications Paper sensor exit

3.3.5High-Voltage Power Supply Board

(1)Dismount upper cover assy. (See Section 3.3.4.)

(2)Remove three screws 1 and draw out high-voltage power supply board 2.

(3)Disconnect all the cables 3 from high-voltage power supply board 2 and dismount high- voltage power supply board 2.

Caution: Note the following when assembling the high-voltage power supply board:

•Mount the high-voltage power supply board with top cover assy removed or open.

•Take care that cable 3 will not interfere with the paper sensor exit when it is connected.

Paper sensor exit

3

1

2

3

1

3 - 10