Oki 5050 manual Loading Documents

When loading multiple-page documents, do not load pa- per thinner than 0.003" (0.08 mm) or thicker than 0.005" (0.13 mm). For single-page documents, do not load paper thinner than 0.002" (0.06 mm) or thicker than 0.006" (0.15 mm).

Loading Documents

To prevent paper jams and problems during operation, stack your documents neatly, aligning their edges, before loading. Do not load documents of different sizes at the same time.

Tip: You can load and prepare to transmit a document while your OKIFAX is still sending or receiving another message, as long as the document feeder is clear. To do this, load the document, select your location and press the Start key. Your document will be sent as a priority when the current communication ends.

1Adjust the document guides to the width of the paper you are using.

2Stack your documents neatly, then insert them face down into the document feeder. Readjust the document guides for a snug fit.

3Your OKIFAX will grip the documents and pull the bottom page into the machine.

4To obtain the best possible quality for the type of docu- ment you are scanning or faxing, use the Yes ◀ key to set the resolution of your document. For most normal documents, the default STD setting works well.

Document Type	Resolution	Resolution
	to Use	of Scan
Normal office documents	STD (Standard)	200 X 100 dpi
Documents with small	FINE or EX. FINE	FINE: 200 X 200 dpi
type or other fine details		EX.FINE: 200 X 400
		dpi
Documents with photos	PHOTO	200 X 200 dpi
or many shades of gray

Faxing: Basic Operations 33

Of5050hw.pm6 33 4/15/98, 9:32 AM