|
Feature Set Guide: English 119
Operation
You can send or receive transmissions using T.38 protocol.
!Your Installer (Network Administrator) must program
the Address Table via the Console Software before you
can send or receive using T.38 protocol.
Sending a T.38 Fax
!When you enter the alias (destination), and you are
using T.38, you can enter the numbers 0 through 9 and
the symbols # and *. Any other characters or symbols
will be ignored.
!Your Installer (Network Administrator) must program
the Address Table via the Console Software before you
can send or receive using T.38 protocol.
!If you want to use a One Touch number, it must be
programmed before attempting T.38 transmission.