|OKIFAX 5750/5950136
Problem Solving
No communication
1Verify that the “#” symbol was the first character entered
when sending the facsimile.
2Verify that the Address Table in the IPFax Console
Software is correctly programmed.
3Are any of the following service codes shown on the
display panel of the facsimile machine?
1501: Remote facsimile machine rejection
1502: GK rejection
1503: No response
1504: Cancel
1505: Board BUSY
1506: Phone number error
1507: GK not found
1508: DHCP failure
15FE: Board error
15FF: Board error
4Does the port number used in IPFAX communication
match the IPFAX of the remote machine?
5Is the remote device T.38 compliant?
6Is the connected network 10 BaseT?
This facsimile machine does not support 100 BaseT.