|
Feature Set Guide: English 153
Changing the Password
!The password is IPFAX until you change it.
IPFAX is all upper case, single-byte characters.
To change the password,
1Start the IPFax Console software.
On the desktop, select Start – Programs – IPFAX console.
2Connect the software to the T.38 device you want to
work with.
3From the top tool bar, select Maintenance.
4From the drop down menu, select Change Password.
5The Change Password screen displays.
6Enter the old password in the Old Password field.
The password is IPFAX until you change it.
IPFAX is all upper case, single-byte characters.
7Enter the new password in the new Password field.
!A password MUST be entered; you cannot leave this
field blank.
8Confirm the new password by entering it in the Type in
New Password again field.
9Click OK to download the new password to the device.
10 The Change Password screen closes.
!Be sure to record any password you program. Keep the
record in a safe place. If you forget a password, refer to
the “Forgot the Password?” of the T.38 section of the
Feature Set Guide.