Check for Proper
Installation
1On the printer control panel, press MENU once or twice until INFORMATION MENU appears on the display.
2Press SELECT.
PRINT MENU MAP appears on the display.
3Press SELECT.
The MenuMap prints.
4Check the MenuMap printout:
•At the top of the printout you should see "HDD:5.00 GB"
•In the right column you should see a new menu section entitled DISK MAINTENANCE
5If you do not see these, remove the control board, lift the hard drive handle and check to be sure that the hard drive is firmly inserted in the connector. Then reinstall the control board and print the MenuMap again.
9
