Oki 80 Series warranty Form Feed, Skip Over Perforation, Changing Character Size

Form Feed

ASCII	Decimal	Hexadecimal
FF	12	0C

Prints the data in the print buffer, returns the carriage, then advances the paper to the top margin of the next page.

Note: (TRS-80 owners only.) This command is not valid with your computer.

Skip Over Perforation

ASCII	Decimal	Hexadecimal
ESC N n	27 78 n (n = 1-127)	1B	4E n (n= 01-7F)
ESC O	27 79	1B	4F

If n is any value between 1 and 127, the printer automatically advances to the top margin of the next page when there is only 1 inch left at the bottom of a page. (This command is ignored if the value of n is more than page length.)

In order to deselect Skip Over Perforations use the command ESC O. In BASIC format, the value of n must appear in a CHR$ statement.

Changing Character Size

ASCII	Decimal	Hexadecimal
DC2 (10 CPI)	18	12
ESC : (12 CPI)	27 58	1B	3A
SI (17.1 CPI)	15	0F
SO (double width)	14	0E
DC4 (cancels double	20	14
width before line end)
ESC W 1	27 87 49	1B	57 31
ESC W 0	27 87 48	1B	57 30

3 – 14 Programming