Oki BISM2 manual Environmental, Operating temperatures, Storage temperature, Reliability

www.ezurio.com

12.4.2FCC and Industry Canada Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

12.4.2.1FCC Labelling requirement

If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: PI401B” or “Contains FCC ID: PI401B.” Any similar wording that expresses the same meaning may be used.

13. Environmental

13.1Operating temperatures

Parameter	Min	Typ	Max
Operating temp (standard product)	-40	25	+85

13.2Storage temperature

Parameter	Min	Max	Unit
Storage temp	-40	+125	°C

Unit

°C

13.3Reliability

Parameter	Test	Comment
Thermal Shock	200 cycles -40ºC /+85ºC 30 min	1 cycle/hour
Vibration	Continuous operation at 60 Hz,	15g max sine wave, 12 hours
	2mm stroke
Shock	50G 11ms Half Sine Wave	6 axis x 3 cycles each axis
Moisture Resistance
High Temp Storage	85ºC, 360 hours
Low Temp Storage	-40ºC, 240 hours
High Temp/Humidity	60ºC, 90%RH, 360 hours
Operation
Thermal shock	-40 to 60ºC in 30min	200 cycles with continuous
		operation
Electro Static Discharge	EN55024:1998 & IEC61000-4-3
Drop Test	75cm to concrete, 3 axis x 2
	cycles per corner