Menu functions - C830 > 42
A

DMIN

S

ETUP

ITEM SETTINGS EXPLANATION
Enter
Password
xxxxxxxxxxxx Enter a password to gain entry to the Admin Setup menu.
Password should be from 6 to 12 digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
Network
Setup
TCP/IP Enable
Disable
Sets TCP/IP Protocol.
Enable: TCP/IP Protocol is available.
Disable: TCP/IP Protocol is not available.
IP Version IP v4
IP v4+v6
Set up the IP version.
Operates with IPv4 for IPv4 (not valid with IPv6).
Operates with both IPv4 and IPv6
NetBEUI Enable
Disable
Sets Enable/Disable of NETBEUI Protocol.
NetWare Enable
Disable
Sets Enable/Disable of NetWare Protocol.
EtherTalk Enable
Disable
Sets Enable/Disable of EtherTalk Protocol.
Frame Type Auto
802.2
802.3
Ethernet II
SNAP
Sets the frame type.
Netware should be enabled.
TypeI P
Address Set
Auto
Manual
Sets the IP Address setting method.
TCP/IP should be enabled.
IP Address xxx.xxx.xxx.xxx Sets the IP Address.
TCP/IP should be enabled.
Subnet Mask xxx.xxx.xxx.xxx Sets the Subnet Mask.
TCP/IP should be enabled.
Gateway
Address
xxx.xxx.xxx.xxx Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
TCP/IP should be enabled.
Web Enable
Disable
Sets Enable/Disable of Web.
Enable: Web/IPP is available.
Disable: Web/IPP is not available.
TCP/IP should be enabled.
Telnet Enable
Disable
Sets Enable/Disable of Telnet.
Enable: Telnet is available.
Disable: Telnet is not available.
TCP/IP should be enabled.
FTP Enable
Disable
Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
TCP/IP should be enabled.