
ITEM | SETTINGS |
DUPLEX X | 0.00 MM |
ADJUST | +0.25 MM |
| +2.00 MM |
| |
| |
DUPLEX Y | 0.00 MM |
ADJUST | +0.25 MM |
| +2.00 MM |
| |
| |
DRUM | ON |
CLEANING | OFF |
EXPLANATION
In duplex printing, horizontally adjusts the print position of the entire image on the rear surface at 0.25 mm pitch.
Any image that lies outside the printable area is not printed.
In duplex printing, vertically adjusts the print position of the entire image on the rear surface at 0.25 mm pitch.
Any image that lies outside the printable area is not printed.
With PS, adjustment in a negative direction is disabled.
Performs a cleaning action of the image drum before printing. This can be effective in improving the image.
NOTE:
In the factory default settings, the MEMORY MENU and SYS ADJUST MENU are not displayed in the user menu. They will be displayed in the user menu when the “MEMORY MENU” and “SYS ADJUST MENU” settings are changed to [ENABLE] in the administrator menu. For details, refer to “How to change the settings - Administrator” on page 68.
Menu functions> 77