Manuals / Oki / Household Appliance / Home Security System

Oki OK-NIP10-A420GP, OK-NIP10-A420P user manual Assign IP address, Physical description

Models: OK-NIP10-A420G OK-NIP10-A420P OK-NIP10-A420GP OK-NIP10-A420

1 13

Download 13 pages 27.23 Kb

Page 7

4. Assign IP address

4. Assign IP address

1.Run the “Installer Wizard” under the Software Utility directory from software CD.

2.The program will search the servers or cameras on the same LAN.

3.After searching, the main installer window will pop up. Click on serial number that matches the one you just note from

2.Physical description

4.Click “Link to selected device(s)” to connect the Internet Explorer to the Network Camera.

If there is no DHCP server on the LAN, please refer to the user’s manual for the methods of assigning an IP address.

6

Image 7

Oki OK-NIP10-A420GP, OK-NIP10-A420P user manual Assign IP address, Physical description

Contents

OK-NIP10-A420GP- Wireless This guide describes the basic functions ofNetwork Camera with Pan/Tilt/Zoom OK-NIP10-A420G- WirelessContact your distributor when such cases happen Warning Before InstallʳDo not disassemble the Network Camera Antennas for wireless model only 1.Check Package contentsʳThe Network Camera Wire or Wireless model ʳ Power adapterNote the serial number from the label on the unit 2.Physical descriptionʳFront panel Rear panelAntennas for wireless model only 2.Physical description 4. Assign IP addressPage 2.Security- Default Level 6. Client Settings Windows XP/2000/Me/98SE3.Lower down the security level bar to “Low”, and press “Apply” “Internet Options” 7. Client Settings Windows XP SP22. Security ”Custom Level” 4.Press “Apply” and then “OK” 3. Security Settings5. Key-Incamera’s IP address and press “OK” on Information Bar