Manuals / Brands / Computer Equipment / Printer / Oki / Computer Equipment / Printer

Oki T400, T410 Power , 1 , 2 , 3 , 1 , 2 , 3 , 1 , 2 , 3

1 35

Download 35 pages, 948.13 Kb

Power

Cable Connection

1 Connect the power cable with the

main unit and AC adapter as shown

in the figure. When you insert the

AC adapter in the main unit, set the

stopper firmly.

2 Plug in the power cable to the outlet.

3 Use a Two-prong adapter if only a

two-prong outlet is available.

1 Connect the power cable with the

main unit and AC adapter as shown

in the figure. When you insert the

AC adapter in the main unit, set the

stopper firmly.

2 Plug in the power cable to the outlet.

3 Use a Two-prong adapter if only a

two-prong outlet is available.

1 Connect the power cable with the

main unit and AC adapter as shown

in the figure. When you insert the

AC adapter in the main unit, set the

stopper firmly.

2 Plug in the power cable to the outlet.

3 Use a Two-prong adapter if only a

two-prong outlet is available.

Stopper

Always make sure to ground the power cable to the ground connector,

otherwise electric shock may result. Construct the ground facility if it

is not available.

6

Contents

Main Page FCC WARNING Page Name of Parts Front View Top c ove r .................... Open this cover when you set the paper. Back View Power Connector ... Connects AC adapter. Optional interface Connecter ... Connects computer. Top Cover Open Power Cable Connection 1 2 3 Power Switch When you turn off the printer, flip the switch to the direction. Computer Connection Connection example using Bi-directional parallel interface Paper Setting 1 2 3 4 5 6 7 until fixed firmly. Close the Top cover. 8 Ribbon Setting 1 2 3 5 6 7 8 Does not print correctly Print error Paper is fed but does not print Printout is not clear Error light Failure? POWER light is not ON even if you turn on the machine. AVERTISSEMENT DE LA FCC Contenu Noms des pices Vue avant Vue arrire Ouverture du couvercle suprieur Ouverture du couvercle avant Alimentation Connexion du cble 1 2 3 1 2 3 1 2 3 - Commutateur dalimentation - Connexion lordinateur Rglage papier 1 2 3 4 5 6 7 8 Rglage du ruban 1 2 3 4 5 Insrez le corps de ruban et installez 6 7 8 Nimprime pas correctement - Erreur dimpression - Le papier est aliment mais ne simprime pas Limpression est estompe Quand le tmoin derreur est allum Tmoin derreur chec? - Le tmoin dalimentation nest pas allum mme si vous allumez lappareil.