Quick Reference |
| CM 701/702/711/712 Cash Register | Quick Reference |
|
Intended use
This cash register is exclusively intended for processing cash register business indoors.
Any other use is considered unintended use.
General information / Safety notes
•Ensure that the mains power supply corresponds to that specified on the rating plate located on the rear side of the cash register.
•This cash register is a highly sophisticated piece of equipment. Never attempt to repair it yourself.
If repairs should become necessary, please bring the cash register to an authorised service centre or the sales out- let.
•Never insert metallic objects, such as a screwdriver, paper clip etc., in the cash register. This could damage the cash register and also exposes you to the risk of an electric shock.
•Always switch the cash register off when it no longer needs to be used.
•Clean any dust from the cash register by wiping it gently with a dry cloth. Never use water or solvents, such as paint thinner, spirit etc., to clean the cash register.
•To disconnect the power supply fully, disconnect the plug from the power socket.
•Never expose the cash register to extreme temperatures.
•Keep all the transport locks in a safe place for future use. The transport locks must be reinstalled for any future transportation of the cash register.
Transport locks
Before the cash register can be put into operation, remove any transport locks installed and store them for future use. Important transport information: In the event of any transport damage, the machine must be returned in the packag- ing together with the operating manual any accessories.
Connecting to the power supply
Before connecting the cash register to the mains power supply, please check that the voltage and frequency specifica- tions stipulated on the rating plate coincide with the local power supply.
Safety note: The power outlet must be near the cash register and easily accessible.
This means that the cash register can be disconnected from the power supply quickly in an emergency.
Note: All data in the machine is retained when the power supply is disconnected. The batteries ensure the data is re- tained for approx. 2 months after the cash register has been disconnected from the power supply.
Printer mechanism
Caution: To guarantee long,
•Never
−print without any paper installed!
−pull the paper while the printer is operating!
−use poor quality paper!
−insert paper rolls which have already been used!
−tamper with the printer using hard objects or move the drive by hand!
•Pay attention to the markings indicating the end of the paper roll. Change the paper roll immediately.
•Have the cash register / printer mechanism serviced regularly by an authorised service centre.
Olympia |
| 5.2005 | Page 3 | All Rights Reserved |
|
