EN18
En
Seal the Case
1Close the Case gently while aligning the mounting projection of the rear lid
and groove.
2Turn the open/close dial clockwise.
• The Case is sealed.
Check the operation of the loaded camera
After sealing the Case, check that the camera operations normally.
1Push the ON/OFF button on the Case and confirm that the camera
turns ON/OFF.
2Press the shutter lever on the Case and confirm that the camera
shutter releases.
• Also operate other control buttons on the Case and confirm that the
camera functions properly.
CAUTION:
• If the open/close dial is not fully turned, the Case will not be sealed. This
will cause water leakage.
• Close the rear lid of the Case so that the lens cap or LCD hood strap
doesn’t catch. If it catches, water leaks may result.
Close
PT-048_EN.book Page 18 Friday, December 11, 2009 4:37 PM