EN23
En
Take out the digital camera
Open the Case carefully and take the digital camera out, then remov e the
adapter from the digital camera.
Wash the Case with pure water
After use, seal the Case again after taking out the camera and wash it
sufficiently in pure water as soon as possible. After using in sea water, it
is important to immerse it for a fixed time (30 minutes to 1 hour) in pure
water to remove any salt.
Dry the Case
After washing with pure water, use a clean cloth to wipe off any
waterdrops. Be sure to use a cloth free of salt residue that doesn’t leave
any loose fibers. Dry the Case completely at a well ventilated location in
the shade.
CAUTION:
When opening the Case, take sufficient care that no water will drip from
your hair or body onto the Case and the camera.
Before opening the Case, make sure that your hands or gloves are free of
sand, fibers, etc.
Do not open or close the Case at locations where there is water spray or
sand.
Take care not to touch the digital camera or the battery with hands w et with
sea water.
CAUTION:
Water leakage may occur when a high water pressure is partially appl ied.
Before washing the Case with water, take out the digital camera from it.
Operate the shutter lever and various buttons of this product in pure water
to remove salt adhering to the shaft. Do not disassemble for cleaning.
Drying the Case with salt adhered may impair the function. Always wash
off any salt after use.
CAUTION:
Do not use hot air from a hair dryer or the like for drying and do not expose
the Case to direct sunlight, as this may accelerate deterioration and
deformation of the Case and deterioration of the O-ring, leading to leakage
of water.
When wiping the Case, take care not to cause scratches.
PT-048_EN.book Page 23 Friday, December 11, 2009 4:37 PM