Olympus 105 manual RC-300C Optional, Quartzdate models only, Correcting the Date and Time

18 RC-300C (Optional)

If the selftimer/remote control indicator doesn’t blink even when you press the button, replace the battery with a new one (CR2025).

How to replace the battery of the remote control (RC-300C)

1	1. Turn the screw on the bottom of the
	remote control counterclockwise to
	loosen.

CORRECTING THE DATE AND TIME	19
(Quartzdate models only)

Be sure to correct the date and time after the batteries have been inserted or replaced.

1	1. Keep the MODE button pressed
	until the “year” indicator starts
	blinking.
	2. Press the SET button to adjust the
2	“year” indicator. If you press the
	button once, the number on the
	display will advance by 1. If you
	keep the button pressed, the
	numbers will run in rapid
	succession. If you pass the

2
3
		OL
		TR
	ON
EC		00C
OT	-3
M	RC
RE

2.Turn the remote control over, and remove the cover. With the battery facing up, remove the old battery and insert a new battery as shown.

3.Replace the cover, turn the remote control over, and turn the screw on the bottom clockwise to tighten.

	intended number, keep pressing to
	return to that number.
3	3. Press the MODE button once more
	to make the “month” indicator
	blink. Press the SET button to
	adjust the “month” indicator. As
	you press the MODE button, the
	blinking indicator changes in the
	order of “year”, “month”, “day”,
	“hour” and “minute”.
4	4. Repeat Steps 2 and 3 to set “hour”
	and “minute”. Make sure the
	“minute” indicator is blinking.

5	5. When “minute” has been set, press
	the MODE button. None of the
	indicators will be blinking and date/
	time correction is now complete.