Tool Bar
[New]
Creates a new DSS file in the Message Tray.
[Save]
Saves the file that is currently being edited in the Message Folder. If you open and edit a DSS
file from a folder other than the Message Tray folder in the Dictation Window, the edited data is saved to the Message Tray with the same file name. If a file with the same name already exists, a character is added to the end of the file name (xxxxxxxx_1.dss format) and saved.
[New Index Mark]
Index marks can be assigned to any position in the selected DSS file. By clicking 
(Index Mark Skip Button), you can move to the index mark position of the file at any time. According to the DSS Specification, a total of 16 index marks can be stored in each file. All index marks remain attached to the file until they are deleted.
To insert an index mark during playback, start playback, move to the desired position (play the file or drag the Position Control to the appropriate position), and select "New Index Mark" on the Tool bar.
To insert an index mark while playback is stopped, press "New Index Mark" at the desired position in the DSS file.
[Delete Index Mark]
To remove an index mark, first use the [Index Mark Skip Button] or the [View All Index Marks] command to move to the desired index mark. While playback is stopped, press Delete Index Mark at the desired position.
[View All Index Marks]
A dialog box opens.
[Start Partial Erase / Undo]
Begin choosing a section of the DSS file that is currently being edited from the current playback position. When this operation starts, the command is replaced with an undo erase command (toggle command).
[Execute partial erase]
Deletes the section between where the Start Partial Erase command was executed and the position where the Execute Partial Erase was chosen.
39