Connecting the DS-2000 Digital Recorder

Notes

-Make sure you finish installing DSS Player 2000 before connecting the DS-2000. If you connect the DS-2000 before installing DSS Player 2000, the "Add New Hardware Wizard" dialog box will open. In this happens, click "Cancel" to exit the wizard and install DSS Player 2000 ( P.6).

-Before connecting the USB cable to the DS-2000, make sure that the DS-2000 is in the stop mode, with its rear-panel POWER/LOCK switch ON and that the HOLD switch is not set to the HOLD position.

1Insert connector A USB cable into the PC's USB port.

2

A

B

Attach connector B USB cable to the DS-2000.

 

When the software recognizes the DS-2000, DSS Player 2000 launches automatically.

 

Notes

-For information about your PC's USB ports, refer to the user's guide supplied with the PC.

-Never remove the USB cable while a communication session is in progress. Data files could be damaged if you do.

9