Charging the battery with the included USB-AC adapter

The included USB-AC adapter (F-2AC) (hereafter referred as AC adapter) has been designed to be used for charging and playback. Make sure that shooting is not being used while the AC adapter is connected to the camera.

1

Multi-connector

Connector cover

USB cable (supplied)

1

AC outlet

3

2

Indicator lamp

On: Charging

Off: Charged

The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (up to

3 hours).

If the indicator lamp does not light, the AC adapter is not connected to the camera correctly, or the battery, camera, or AC adapter may be broken.

For details on the battery and the AC adapter, see “Battery, USB-AC adapter (included), Charger (sold separately)” (p. 57).

Battery can be charged by connecting the camera to the computer. However, when charging with the system other than Windows XP (SP2 or later)/Windows Vista/ Windows 7, charging takes much time.

When to charge the batteries

Charge the battery when the error message shown below appears.

Flashes in red

BATTERY EMPTY

4 14M

Monitor top left

Error message

When not using a computer

See the next section under “Setting the date, time and time zone.”

When using a computer with system other than Windows XP (SP2 or later)/ Windows Vista/Windows 7

The Instruction Manual PDF file can be saved on a computer with the following procedure.

Connect the camera to the computer and copy the instruction manual PDF file for your language in the “Manual” folder in the internal memory of the camera.

12EN