Olympus 227575, 227580, 227585, 7030 Creating panoramic images (pmode), 24EN, 4Repeat Step 3 to take a third frame, 1Press the shutter button to take the first frame, Press Gto go to the submenu

Creating panoramic images (pmode)

1 Set the shooting mode to p.

	PANORAMA
	AUTO
	0.0
	WB
	AUTO
	4 14M
2	Press Gto go to the submenu.
3	Use HIto select the desired mode
	and then press the A button to set.

Submenu 1	Application
	Three frames are taken and
	combined by the camera. The
AUTO	user only composes the shots
	so that the target marks and
	pointers overlap, and the camera
	automatically releases the shutter.
	Three frames are taken and
	combined by the camera. The
MANUAL	user composes the shots using
	the guide frame and manually
	releases the shutter.
	The frames that were taken are
PC	combined into a panorama image
	using the PC software (ib).

For details on installing the PC software (ib), see “Battery charge and camera setup” (p. 10).

When set to [AUTO] or [MANUAL], [IMAGE SIZE] (p. 31) is fixed to [2].

The focus, exposure (p. 28), zoom position (p. 27), and white balance (p. 28) are locked at the first frame.

The flash (p. 27) is fixed to $(FLASH OFF) mode.

Taking pictures with [AUTO]

1Press the shutter button to take the first frame.

2Move the camera slightly in the direction of the second frame.

AUTO

Target mark

Pointer

CANCEL MENU SAVE OK

Screen when combining images

from left to right

3Move the camera slowly while keeping it straight, and stop the camera where the pointer and target mark overlap.

●The camera releases the shutter automatically.

AUTO

CANCEL MENU SAVE OK

To combine only two pictures, press the A button before taking a third frame.

4Repeat Step 3 to take a third frame.

●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.

To exit the panorama function without saving an image, press the mbutton.

If the shutter does not automatically release, try [MANUAL] or [PC].

24EN