Olympus 227575, 227580, 227585, 7030 1 overlaps joint area, 3Compose the next shot so that joint area, 5Repeat steps 3 and 4 to take a third frame, After first shot, Before first shot

Taking pictures with [MANUAL]1Use HIto specify at which edge the next picture is to be connected.

Direction for		MANUAL
combining the
next frame	1	2

BACK MENU

2Press the shutter button to take the first frame.

			Joint areas
	MANUAL		MANUAL
1	2	1	2
BACK MENU		CANCEL MENU	SAVE OK

1st frame

3Compose the next shot so that joint area1 overlaps joint area 2.

MANUAL

1 2

CANCEL MENU SAVE OK

Composition of the 2nd frame

4Press the shutter button to take the next shot.

To combine only two pictures, press the A button before taking the third frame.

5Repeat steps 3 and 4 to take a third frame.

●After the third frame is taken, the camera automatically processes the frames and the combined panorama image is displayed.

To exit the panorama function without saving an image, press the mbutton.

Taking pictures with [PC]1Use FGHIto select the direction that the frames are combined.

2Press the shutter button to take the first frame, and then compose the second shot.

Before first shot

PC

1 2

BACK MENU

After first shot

PC

1 2

EXIT MENU

●After the first shot, the area shown in white reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image in the monitor.

3Repeat Step 2 until the number of desired frames is taken, and then press the A button or mbutton when finished.

Panorama shooting is possible for up to 10 frames.

Refer to the PC software (ib) help guide for details on how to make panorama images.

EN 25