Adjusting the CCD and the image processing function [PIXEL MAPPING]

s(Settings 2) X PIXEL MAPPING

This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.

For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.

To adjust the CCD and the image processing function

Press the A button when [START] (Submenu 2) is displayed.

●The camera checks and adjusts the CCD and the image processing function at the same time.

Adjusting the brightness of the monitor [s]

s(Settings 2) X s

To adjust the monitor brightness

1Use FGto adjust the brightness while viewing the screen, and then press the

Abutton.

s

BACK MENU

SET OK

Setting the date and time [X]

t(Settings 3) X X

“Setting the date, time and time zone” (p. 13)

To select the date display order

1Press Iafter setting Minute, and use FGto select the date display order.

X

Y M D TIME

2010.02 .26 12 :30 Y/M/D

Date order

CANCEL MENU

SET OK

44EN