13
Ejecting SmartMedia cards
1
Set the POWER/LOCK switch to OFF.
The display disappears.
2
Raise the SmartMedia ejection switch.
Pull the SmartMedia card out with your fingers.
·····································································
The SmartMedia ejection switch won’t work
if the POWER/LOCK switch is set to ON.
Attention
•SmartMedia cards are precision devices. Never
force the cards when inserting them, or subject
them to sharp blows.
•Avoid handling and storing SmartMedia cards
in a hot, damp environment.
•Do not touch the contact area (gold electrodes)
of the SmartMedia card with bare hands.
If a SmartMedia card gets dirty, wipe it with a soft,
dry cloth.
•SmartMedia cards may be vulnerable to
electrostatic data corruption. When carrying a
SmartMedia card, put it in its case.
Remember to back up data from SmartMedia cards
to a PC or other storage medium from time to time
(→ P.35).
•Corrupted, lost, or erased data cannot be
restored.
1
2
POWER
/LOCK
ON
OFF
Inserting and Ejecting SmartMedia cards
SmartMedia inserted fully into theslot
When you set the POWER/LOCK switch to
the ON position, “PLEASE WAIT” flashes on
the display.
SmartMedia not inserted fully intothe slot
When you set the POWER/LOCK switch to
the ON position, “INSERT CARD” flashes on
the display for 2 seconds. Pressing any button
with no SmartMedia card inserted causes
“INSERT CARD” to appear again.
Push the SmartMedia card fully into position.
Bottom side
of SmartMedia
projecting from
the slot