Olympus DS-2000 Index Marks

26

Index Marks

Setting an Index Mark

1

Press the INDEX button during

recording or playback to set an

index mark.

An index mark is set and the index number

appears on the display.

Clearing an Index Mark

1

Play the file with the index mark you want to

clear.

2

Press the FF/+ or REW/– button to choose the

index mark to be cleared.

3

Press the ERASE button while the

index number appears for about 2

seconds on the display.

The index mark is erased.

Index numbers are reassigned automatically.

································································································

Notes

•Up to 16 index marks can be set in a file. Attempting to set more index

marks will cause “INDEX FULL” to appear on the display.

•Index marks cannot be set or cleared in a file stored on a SmartMedia

card with a write-protect seal attached to it (→ P.7).

•Index marks cannot be set or cleared in a locked file (→ P.27).

Index marks can be incorporated into a file during recording or playback to make it easy to locate

interesting information. Index marks enable faster access to important information by pressing the

FF/+ or REW/– button.

MENU

INDEX

REC

STOP

ERASE

1

MENU

INDEX

REC

STOP

ERASE

2

1

3

Index Marks

Contents

Main DS-2000 For Safe And Correct Usage General Precautions Batteries Warning AC Adapter Warning In case Main Features Table of Contents Getting Started Preparing For Recording Basic operations Other functions SmartMedia What is SmartMedia? Memory Sizes of SmartMedia Cards and Approximate Recording Times* Audio Recording Format Write-protect SmartMedia Identification of Parts Display (LCD Panel) Page Replacing Batteries Using the AC Adapter Inserting and Ejecting SmartMedia cards Insert the SmartMedia in the correct direction. Push the SmartMedia card fully into position. Set the POWER/LOCK switch to ON. The display appears. Ejecting SmartMedia cards Set the POWER/LOCK switch to OFF. Raise the SmartMedia ejection switch. SmartMedia inserted fully into the slot SmartMedia not inserted fully into the slot Setting Time/Date Press the MENU button. Press the FF/+ or REW/ button to choose the time/date setup screen. Repeat steps 1 and 2 to set the time and date: Press the STOP button to end. Page Recording choose a folder. Press the REC button to start recording. Press the STOP button to stop recording. Pause Recording Microphone Sensitivity Recording Modes 5 2,4 Press the MENU button. choose between SP and LP. Press the STOP button to close the menu. Playing Playing Canceling Playback Playback Functions Page Erasing Erasing One File at a Time choose a folder. choose the file you want to erase. 2 3,4 Erase All Files from a Folder 2,3 choose the folder in which you want to erase all files. Press the ERASE button for 3 seconds or longer. Press the ERASE button again. Using the Variable Control Voice Actuator (VCVA) Start recording with the VCVA switch set to ON. Using the VOLUME control, adjust the start/stop actuation level. Inserting Recordings into Previous Files 3,4 2 6 5 Index Marks Locking Files 82,4,6 5,7 Alarm Playback Function 3 5,7 1 2,4,6 12 9,11 8,10 System Sounds 6 3,5 2,4 Moving Files Across Folders 1,4 Choose the file you want to transfer and press the PLAY button to play it. 2 Press the FOLDER button while the file is playing. choose the destination folder. 8 3,5,7 2,4,6 Page Formatting SmartMedia 3,5 2,4 Transferring Data to a PC Reset Setting the HOLD switch to the HOLD position. Hold Training your PC for Voice Recognition Menu List Press the MENU button Alarm Message List Meaning Alarm Message List Action Explanation Troubleshooting Probable cause Symptom Action Specifications Accessories (optional) Technical Assistance And Support Tested T o Comply With FCC Standards FOR HOME OR OFFICE USE Canadian RFI