Olympus DS-2000 - page 33

33

Assigning Folder Names

6

Press the FF/+ or REW/– button to

choose characters.

Available characters are 0 to 9, A to Z,

and space.

PLAY button: To input the selected

character and advance

the input position.

FOLDER button: Acts as a backspace.

ERASE button: To delete the flashing

character.

INDEX button: Lets you insert one

space.

7

When you have finished setting

the folder name, press the PLAY

button for 1 second or longer.

This completes the folder naming

procedure. (If you wish to enter another

folder name, press the FF/+ or REW/–

button to open the folder name setup

screen and repeat the process starting

from Step 3.)

8

Press the STOP button to close

the menu.

·····································································

Notes

•The folder naming process ends automatically

when the eighth character is set.

•Folder names can be changed only if a SmartMedia

card is inserted.

•A SmartMedia card with a write-protect seal

attached to it cannot be changed.

•When a SmartMedia card is formatted, folder

names that you assigned will be reset to the initial

names.

Contents

Main DS-2000 For Safe And Correct Usage General Precautions Batteries Warning AC Adapter Warning In case Main Features Table of Contents Getting Started Preparing For Recording Basic operations Other functions SmartMedia What is SmartMedia? Memory Sizes of SmartMedia Cards and Approximate Recording Times* Audio Recording Format Write-protect SmartMedia Identification of Parts Display (LCD Panel) Page Replacing Batteries Using the AC Adapter Inserting and Ejecting SmartMedia cards Insert the SmartMedia in the correct direction. Push the SmartMedia card fully into position. Set the POWER/LOCK switch to ON. The display appears. Ejecting SmartMedia cards Set the POWER/LOCK switch to OFF. Raise the SmartMedia ejection switch. SmartMedia inserted fully into the slot SmartMedia not inserted fully into the slot Setting Time/Date Press the MENU button. Press the FF/+ or REW/ button to choose the time/date setup screen. Repeat steps 1 and 2 to set the time and date: Press the STOP button to end. Page Recording choose a folder. Press the REC button to start recording. Press the STOP button to stop recording. Pause Recording Microphone Sensitivity Recording Modes 5 2,4 Press the MENU button. choose between SP and LP. Press the STOP button to close the menu. Playing Playing Canceling Playback Playback Functions Page Erasing Erasing One File at a Time choose a folder. choose the file you want to erase. 2 3,4 Erase All Files from a Folder 2,3 choose the folder in which you want to erase all files. Press the ERASE button for 3 seconds or longer. Press the ERASE button again. Using the Variable Control Voice Actuator (VCVA) Start recording with the VCVA switch set to ON. Using the VOLUME control, adjust the start/stop actuation level. Inserting Recordings into Previous Files 3,4 2 6 5 Index Marks Locking Files 82,4,6 5,7 Alarm Playback Function 3 5,7 1 2,4,6 12 9,11 8,10 System Sounds 6 3,5 2,4 Moving Files Across Folders 1,4 Choose the file you want to transfer and press the PLAY button to play it. 2 Press the FOLDER button while the file is playing. choose the destination folder. 8 3,5,7 2,4,6 Page Formatting SmartMedia 3,5 2,4 Transferring Data to a PC Reset Setting the HOLD switch to the HOLD position. Hold Training your PC for Voice Recognition Menu List Press the MENU button Alarm Message List Meaning Alarm Message List Action Explanation Troubleshooting Probable cause Symptom Action Specifications Accessories (optional) Technical Assistance And Support Tested T o Comply With FCC Standards FOR HOME OR OFFICE USE Canadian RFI