Recorder buttons that are used to input characters
Button | Push | Action |
|
|
|
REC/SET | Press once | To input the selected character and advance the input position. |
|
|
|
| Press and hold | Confirms folder name or file comment. |
|
|
|
FF/+ | Press once | Selects character to be input: forward. |
|
|
|
| Press and hold | Skips forward quickly through characters. |
|
|
|
REW/– | Press once | Selects character to be input: back. |
|
|
|
| Press and hold | Skips back quickly through characters. |
|
|
|
NEW | Returns to previous character. | |
|
|
|
ERASE | To delete the flashing character. | |
|
|
|
INDEX | Press once | Switches between character groups (type). |
|
|
|
| Press and hold | Quickly cycles through the character groups (types). |
|
|
|
DISPLAY | Press once | Selects character to be input: skips ahead by 5 characters. |
|
|
|
| Press and hold | Quickly skips ahead in increments of five characters. |
|
|
|
Use the two following methods to quickly find characters.
1.When the INDEX button is pressed, the displayed character group (example: Uppercase, lowercase, template, symbols) will change, and you can then press the FF/+ or REW/– buttons to select characters.
2.Every time the DISPLAY button is pressed, it will skip ahead by five characters, so you can quickly move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U = Z = a = f = k = p = u = z = 1 = 6 = , = ( = } = $ = ^ = (Space) = DICT. = TO DO...
If you press the DISPLAY button while a character other than one of the above appears, you will skip to the closest forward character in the above cycle.
Pressing the DISPLAY button again will then cycle through every fifth character as shown above.
Folder Assigning (FolderName) Names
example:
If you press the DISPLAY button while “MEMO” is displayed, “TO DO” will appear. If you press the DISPLAY button while “B” is displayed, “F” will appear.
33