Using Voice Recognition Software (optional)

Notes on Recording For Voice Recognition

Voice Using Software Recognition (optional)

When recording voices for use in voice recognition, set up your DSS recorder as follows to facilitate recognition.

•Set the microphone sensitivity to "DICT". (☞ P.19)

•Set the recording mode to "SP". (☞ P.18)

•Set the Variable Control Voice Actuator (VCVA) to "OFF". (☞ P.16)

•Only record voices that have already been registered in the voice recognition software speak.

•Record in a relatively quiet environment.

•Have the person speaking within 5-10 cm of the built-in microphone of the recorder (5 to 10 cm).

•Speak continuously.

Voice files recorded under the following conditions cannot be processed by voice recognition because their recognition rates may be very low.

•A conference or meeting where the voices of many people have been recorded.

•Seminar or lecture in which ambient noise tends to be recorded.

68