Olympus DS-330 Using the AC Adapter, Hold

Using the AC Adapter

Plug the optional AC adapter (Olympus Model A321 or A322) into household power outlet and connect the power plug to the recorder’s power connector (DC 3 V) as shown in the illustration. Always stop recording before connection. Otherwise it may not be possible to play back the voice data being recorded.

•Always stop recording before connection or disconnection.

•When the AC adapter is not in use, disconnect the power supply plug from the power outlet.

•Use only the correct power supply voltage as indicated on the adapter.

•Do not use the AC adapter when connecting the recorder to the USB port.

Hold

HOLD Usingthe ACAdapter /Hold

Setting the HOLD switch to the HOLD position.

If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow, the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.

Remember to reset the HOLD switch when using the recorder.

Notes

•If you set the recorder to hold during Stop mode, the display goes dark. If you press any button, the time will flash for about 2 seconds, but the function of the button is disabled.

•The alarm will sound at the scheduled time even if the recorder is set to hold. The recorder begins to play the file associated with the alarm when you press any button.

•If you are recording when you switch the recorder

to HOLD, recording will continue until the recorder

memory runs out. 9