CONNECTING TO EXTERNAL EQUIPMENT

USB Port Connection (Windows, Macintosh)

The camera’s USB port and accessories make it easy to connect to a computer equipped with a USB port for image data uploading and downloading. First install the USB driver software from the bundled CD-ROM on your computer, and then use its special USB cable to connect. Once connected, your computer recognizes the camera as an external storage device.

•See the documentation on “Bundled Software User’s Manual” for full details about connections, installing the USB driver, minimum computer system requirements, and other information.

■Connecting to a Computer with the USB Cable

Small connector

Special USB cable (bundled with camera)

USB port

Large connector (standard USB connector)

USB port

•Whenever connecting the USB cable to the camera, make sure the arrow mark on the plug is aligned properly with the arrow mark on the side of the camera’s terminal.

•Plug the USB connectors into the ports as far as they will go. Incorrect connection can result in improper operation.

•The camera is not supplied power by the USB cable. Be sure to use the optional AC adaptor to power the camera whenever using a USB cable connection.

•Your camera requires a special QV Camera USB cable. Connection using a standard USB cable is not supported.

E-127