PLAYBACK

IMPORTANT!

•Auto Power Off (page E-38) is disabled whenever Slide Show is being used. This means you should not leave Slide Show running when using batteries to power the camera. Doing so can rundown batteries. Be sure to stop Slide Show and turn off the camera after you are finished.

•Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button op- eration, or hold down the button until the image stops.

•Images copied from another digital camera or a com- puter may take longer time to appear than the Slide Show interval time you select.

Resizing an Image

You can use the following procedure to change an image to VGA size (640 x 480 pixels).

•VGA is the optimum image size for attachment to e-mail messages or incorporation into Web pages.

1.Align the POWER/Function Switch with PLAY.

2.Use [] and [] to display the image you want to resize.

3.Press / /MF RESIZE.

4.In response to the confirmation message that appears, use [] and [] to select “Yes”.

•Select “No” to exit the procedure without resizing the image.

5.Press SET/DISP.

IMPORTANT!

•The resized version of the image is saved as a new file.

•The original, pre-resized image is also retained in memory.

•Images smaller than 640 x 480 pixels cannot be resized.

•Movie Mode, Panorama Mode, and TIFF (uncompressed) images cannot be resized.

•Resizing of an image cannot proceed if the message “MEMORY FULL Delete unneeded images” appears during the above procedure.

E-108